|
Product:
|
Cooler Master HHC-001 CPU Cooler |
|
Price:
|
$65 (CAN) / $40 (U.S)
|
|
Supplied By:
|
Coolermaster
|
|
Author:
|
BigDaddy
|
|
Date:
|
April 6th, 2002
|
|
Rating:
|
|
MODTHEBOX would like to thank Tony from Cooler Master
for sending the HHC-001 CPU Cooler for review.
Introduction:
When you think of the word Cooler Master, what comes to mind? Cases? Case fans? Hard drive coolers? By and large, the
majority of us would answer heat sink fans. That’s because for over 10 years, Cooler Master has been synonymous with
CPU cooling and our friends in Taiwan haven’t been resting on their laurels. The recent release of the new HHC-001 CPU
Cooler with heat pipe technology proves Cooler Master is still providing new solutions to keep your CPU cool. Today in
the MTB labs we turn up the heat on this hot new cooling product.
Specifications:
The heat sink fan is designed for use with AMD Duron, Athlon and Athlon XP processors using the Socket A and Socket 462
design. It is also compatible with Socket 370 Intel Pentium III Coppermine, Tualatin and Celeron chips. Here are some of
the product specifications taken directly from the Cooler Master website:
|
Cooler Master HHC-001 CPU Cooler - Key Specifications
|
| Fan Dimensions: | 60x60x25mm |
| Heatsink Dimensions: | 80x60x44mm |
| Rated Voltage: | 12VDC |
| Started Voltage: | 7VDC |
| Bearing Type: | Two Ball Bearings |
| Life Time: | 50,000 hours |
| Connector: | 2 x 3-pin |
|
Fan Speed Control Settings
|
| Rated Speed: | 6800 RPM |
|
Max Air Flow
|
| Air Flow: | 36.11 CFM |
|
Special Features
|
| Patented spring clip for easy installation | Special heat sink design for maximum heat dissipation |
|
Click image for larger view
|
|
The first thing that grabs your attention picking up the package is the bold statement "#1 Choice for Overclocking".
The product comes sealed in clear plastic packaging with a small tube of thermal grease and a silicon packet for
moisture protection.
|
|
Click image for larger view
|
|
Opening the product, the eye is immediately drawn to the two copper pipes protruding from the side of the heat sink.
The unit includes a 60mm fan sporting the Cooler Master label which is protected by a chrome fan grill. A 3 pin
motherboard connector provides power to the unit and allows for RPM monitoring. Rounding out the features is a large
retention clip running through the heat sink to secure the unit tightly to the CPU socket.
|
|
