ATXCases.com Escape Pod Films Sketch Comedy
Case, Power Supply, Fan Reviews
  Product:     MTB Exclusive: X-Woofer 3D Vibro Woofer Speaker  
  Price:     $94 (CAN) / $79 (U.S)
  Supplied By:     X-Woofer
  Author:     Hi-TEK
  Date:     March 21st, 2005
  Rating:     star star star star star star

X-Woofer 3D Vibro Woofer
Click image for larger view
X-Woofer 3D Vibro Woofer
Click image for larger view
 
Out of the box, my first impressions of the X-Woofer 3D Vibro Woofer Speaker were both skeptical and mixed. The premise for this particular product is to be a wearable audio solution that can be connected to various sound appliances such as PC's, DVD players, CD players and MP3 Players. The overall design of the X-Woofer breaks away from traditional desktop speakers and has been engineered to be a worn on your shoulders without the need to install rear speakers to enjoy 3D sound. The composition of the X-Woofer consists of a two piece silver coloured plastic housing with gold highlights that measure approximately 285mm X 235mm X 14mm. The X-Woofer is very light weight at 1.3kg and can be tucked away into back pack for easy transport.

At the rear of the X-Woofer are two integrated speakers and vibration units. The speakers have a low output range of 1W + 1W per channel and vibration output range 2W + 2W per channel. Overall sound frequency response is 450Hz - 20KHz and sound impedance is 8 Ohms which is slightly lower than the 16 Ohms used in the Zalman ZM-RS6F Theatre 6 Headphones that I reviewed 3 years ago.

X-Woofer 3D Vibro Woofer
Click image for larger view
X-Woofer 3D Vibro Woofer
Click image for larger view
 
The X-Woofer 3D Vibro Woofer Speaker includes a silver coloured control unit which allows consumers to adjust both volume and vibration levels. Towards the top right hand side of the unit is a 2-position ON/OFF switch and on the left a LED that provides a visual confirmation that the unit is ready for use.

X-Woofer 3D Vibro Woofer
Click image for larger view
X-Woofer 3D Vibro Woofer
Click image for larger view
 
At the bottom of the controller unit is a 5-pin plug that allows consumers to directly connect the X-Woofer 3D Vibro Woofer Speaker. The cable length is generous at 1.8 meters and provides enough length for consumers to place this unit on a table or floor while sitting comfortably on a chair or sofa.
Back Forward

AddThis Social Bookmark
Button
[ Home | Archives | Articles | Reviews | Gallery | Forums | Contact Us]
All trademarks used are properties of their respective owners. All rights reserved.
ModTheBox.com Copyright © (c) 2003-2009 Prine Systems Inc