|
|
 |
|
Product:
|
I-Star Nitro AX Full Tower Case |
|
Price:
|
$137 (CAN) / $118 (U.S)
|
|
Supplied By:
|
I-Star USA
|
|
Author:
|
Mars
|
|
Date:
|
January 14th, 2006
|
|
Rating:
|
|
|
Click image for larger view
|
Click image for larger view
|
|
The I-Star Nitro AX Full Tower Case features a removable motherboard tray that is held in place with thumbscrews, and
has various guides and locking tabs to help line it up and secure it into place inside the chassis.
|
|
Click image for larger view
|
Click image for larger view
|
|
The Nitro AX comes with a host of header connectors for the front I/O panel, which include audio (Headphones and MIC),
2 x USB 2.0, and 1 x Firewire IEEE1394. There is also the standard connectors for Power and Reset switches, Power and
Hardrive LED’s, and a case speaker connector. There is also a 4-pin connector to supply power to the optional front
LED bezel lighting and a connector for the case intrusion micro switch.
|
|
Click image for larger view
|
Click image for larger view
|
|
In order to install a front fan, the front fascia needs to be removed. This is accomplished by simply pushing on the
six locking tabs and gently pulling the fascia away from the case. While the front fascia is removed this is a good
time to remove any of the break away tabs covering the 5.25" slots as needed, and remove the floppy drive bay cage.
The installation of the floppy cage and optical drives can also be performed without removing the front fascia. The
holes for the front fan are large enough to allow for good air flow, so removing the stamped grill is not necessary.
|
|
|
|
|
|
