|
 |
|
Project:
|
SINGED Gaming Rig 2 - Scorpio TA-10BD Full-Tower Case Project |
|
Author:
|
Hi-TEK
|
|
Date:
|
February 24th, 2003
|
|
Click image for larger view
|
Click image for larger view
|
|
The first step was to strip the case completely down to its bare essentials. The Scorpio TA-10BD
Full-Tower Case conforms to the same design specifications as the Antec SX1030B Mid-Tower where the top
and bottom panels are rivited to directly to the case frame. To speed up the stripping process, I started
with the left and right hand side panels which were easily removable by unscrewing a set of mounting
screws.
|
|
Click image for larger view
|
Click image for larger view
|
|
I removed everything that wasn't bolted down including the front plastic bezels, case feet, drive cages, PSU mounting bracket, fan
holders and ATX I/O back plate. With the frame lying completely face down, I starting planning out the locations of where all the
components would be mounted and how to address issues in terms of cable management.
|
|
Click image for larger view
|
Click image for larger view
|
|
The chassis was moved into my garage where I could start some dremeling work for cleaning up areas of the frame which needed
improvements. I used a Makita Drill to remove all the rivets from the top panel and would later re-mount the top panel using
standard 6-32 mounting screws and bolts after a slight modification.
|
|
|
|
|
Error processing SSI file
|
 |
Error processing SSI file
|
|
Error processing SSI file
Error processing SSI file
